845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Concrete Degreaser & Etch
Concrete Mortar Dissolver can be used to remove cured cement, concrete, mortar, or stucco from most surfaces. Non fuming, non corrosive, 100\% biodegradable product contains no muriatic, sulphuric, or phosphoric acid. Will not damage tools or equipment, and won't harm paint, rubber, plastic, vegetation, grass, or metal. Safe for drains. No need for respirators or protective clothing when using product. 23 oz (ounce) spray bottle.
Prepares concrete surfaces for painting. Granular material requires only mixing with water, it also removes efflorescence from masonry. Cleans mortar from brick and ceramic tile and etches galvanized surfaces for painting. Made from sulphamic acid. Contains No Muriatic Acid.
A specially formulated concentrate to clean grease and oil stains from concrete surfaces prior to painting and staining. Wipe up excess oil and grease spills before washing. Scrape and sweep away dirt and loose contaminants on surface. Use at full strength to clean tough stains and before painting. For general-purpose cleaning, add 1 quart of degreaser to 1 gallon of water and mix thoroughly before cleaning. To keep your painted floor looking great, add 1 cup of degreaser to 1 gallon of water. Scrub the surface with a stiff bristle brush or broom. Avoid splashing and wear protective clothing and eyewear when applying the product. Wait 10 to 15 minutes then rinse thoroughly and remove excess water with squeegee of mop. Enviromentally safe and will not harm grass or plants. Use on garages, basements, driveways, sidewalks, porches, patios, and stairs. 32 oz. should clean approximately 75 sq. ft. at full strength.